StoreEasy Storage

NAS 1500 Rebuild question

 
Neil_41
New Member

NAS 1500 Rebuild question

Hi,

Rebuilding NAS 1500 with Server 2003, boots onto CD then says unable to find any drives to install onto .. have broken the existing HP array and deleted all logical devices and selected one RAID 5 array and initialized the drives .. any ideas guru's ?

PS Do have the hp recovery cd but want a diff. drive config from their's..

N'os.
3 REPLIES 3
peyrache
Respected Contributor

Re: NAS 1500 Rebuild question

there are a special raid configuration on NAS1500
JYP
Jon Paul
Trusted Contributor

Re: NAS 1500 Rebuild question

Hi Neil,
What drive config do you want to make?
System comes with Adaptec 2410 controller for the hardware RAID. You most likely have to add (F6) the driver in during your OS install.
Please note: Do not change the Adaptec card firmware. If you update the Adaptec firmware, the original restore disk will not work.
Is it possible to migrate to the drive configuration you desire?
Hope this helps,
JP

Neil_41
New Member

Re: NAS 1500 Rebuild question

Thank-you, a great reply.

Yes youre right of-course the 2410, im on the Adaptec site now, will get the driver and see how that goes..

Will keep in touch, Thanks !

N