StoreEasy Storage

Replace HD in NAS 1200 and recover

 
CA1146632
New Member

Replace HD in NAS 1200 and recover

I believe all of the drives in the NAS 1200 are hot plug but I cannot find any information to verify the process for replacing and recovering from a failed drive. If there is a document that defines the process, a link would be appreciated. A direct answer as to the process for replacing and recovering a drive is also appreciated.

Thanks,

Dale
1 REPLY 1
CA1118839
Valued Contributor

Re: Replace HD in NAS 1200 and recover

The instructions for performing the hot-plug (i.e., replacement of hard drive) are in the Install Guide Addendum at:

http://h200005.www2.hp.com/bc/docs/support/SupportManual/c00092004/c00092004.pdf