StoreEasy Storage

Resetting password for J3278a HP cdrom server

 
CA1112127
New Member

Resetting password for J3278a HP cdrom server

Who do you reset the server to the default password? I tried root and pass with no luck.
2 REPLIES 2
BR742453
Frequent Advisor

Re: Resetting password for J3278a HP cdrom server

Default username is "root" and default password is "pass" without quotes.

Factory reset is done by:
1 turning off unit

2 pressing button on the back with paperclip holding down while powering on the unit.

3 hold button until Status/Network leds blink orange with 2 sec. intervalls.

4 release button for 2 seconds and press and hold again for 10 sec or more until Status light is steady orange

5 turn off the unit and wait for atleast 30 second before powering again.

6 use the "arp-s ip mac" command to set the IP on the device.

Kind regards,

SCOOTER
Zo, dat was dan dat.
CA1154570
New Member

Re: Resetting password for J3278a HP cdrom server

Scooter, you're the man! Thanks. We had this equipment and inherited it from the past IT admin and he had no idea what we were talking about. Now we can use the CD Tower.

Soccoach