StoreEasy Storage

Storeeasy 1466 SO Dead

 
twocare
New Member

Storeeasy 1466 SO Dead

Hello, recently we bought a storeeasy 1460, we created a raid 5 and the operating system does not go up, who can help me to upload the operating system.

1 REPLY 1

Re: Storeeasy 1466 SO Dead

HPE StoreEasy 1460 models come with Windows Storage Server 2016 pre-installed from the factory on the four internal LFF drives.

Please check if you are able to see the drives from IP by pressing F10 while logging to server post. On Intelligent Provisioning, select Smart Storage Administrator(SSA) and check if the embedded controller detected along with disks. If the disks detected, logical drive presented. check the health of the disks and controller. Delete all the logical drives from SSA and do not create it back. The recovery image will create the logical drives automatically.

For System Recovery follow the procedure as mentioned in Page no 93 of the Administrator Guide,

https://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00028243en_us-3.pdf

HPE StoreEasy 1x60 Storage Recovery DVD 5.03.0a download link,

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX-779a532511094e1db3beb3ee95

 

Please find Quick spec and Best practice document as well,

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00041171enw

https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA6-3618ENW.pdf

 

Hope this helps!
Regards
Subhajit

I am an HPE employee

If you feel this was helpful please click the KUDOS! thumb below!

*************************************************************************

 

 


I work for HPE
Accept or Kudo