StoreEasy Storage
1748162 Members
3658 Online
108758 Solutions
New Discussion юеВ

Re: configure disk in netapp

 
Madan Kumar
Occasional Advisor

configure disk in netapp

Hi, I have to add a new disk in a VG. We are using Netapp storage. I havnt woked on Netapp before. anyone can please explain how to add/configure disk in VG in Netapp storage. also let me know how to find Alternate link of disks in netapp storage.

4 REPLIES 4
TTr
Honored Contributor

Re: configure disk in netapp

You need to install the NetApp SAN toolkit for HP-UX. There are utilities that will show you how to configure the LUNs. I do remember of a document that was very good but don't know if this was in the depot or separate.
V. Nyga
Honored Contributor

Re: configure disk in netapp

Hi,

do you have support for the netapp?
You should try the netapp site:
http://www.netapp-web.com
http://www.netapp.com/us/

Also - are you using netapp with nfs?
For nfs-mounted directories you only have to add the disk and expand the VG at the netapp.
No sense to do anything at the HP server.
Netapp has its own os where you have to expand VG. Also you have to check the firmware of the disks - if the new disk has a newer firmware you have to increase it at the old disks too.
Contact the Netapp hotline - i've never had problems there to get help.

HTH
Volkmar
*** Say 'Thanks' with Kudos ***
Wim Rombauts
Honored Contributor

Re: configure disk in netapp

Your NetApp should have a web management console. That is the easiest way to add storage to your system. But you will need some NetApp working knowledge anyway.

Generally the steps are as follows :
- Create a additional LUN's. To do that, you will need sufficient space in a volume.
How you organize your LUN's in volumes is purely your choice.
- Lookup the initiator group name for you server. The LUN's that are already assigned to your system will show this initiator group name. Assign these new LUN's to your server and give them a unique LUN ID. This uniqueness is only for LUN's that are assigned to the same server.
- Run ioscan on your server and see what disks appear. If you see multiple new disks while you created only 1 new LUN, all these new disks are alternate paths to the same LUN.
IBaltay
Honored Contributor

Re: configure disk in netapp

Hi,
you can register at www.netapp.com. There are very good tech docs there:
e.g the
Ontap 7.2 storage management guide:
http://now.netapp.com/NOW/knowledge/docs/ontap/rel7261_vs/pdfs/ontap/smg.pdf

or
Ontap 7.3 storage management guide:
http://now.netapp.com/NOW/knowledge/docs/ontap/rel731/pdfs/ontap/setup.pdf
the pain is one part of the reality