Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

1/8 G2 Tape Autoloader SCSI: how to get rid of error ?

evg_2
Occasional Visitor

1/8 G2 Tape Autoloader SCSI: how to get rid of error ?

Firmware 2.10 / 1.90n
Bootcode Firmware Revision 0.60

I have error LED blinking and the error code is: Unload Timeout
Code: F5 95

If I look at the logs in web interface, i see the date of this error is old - 3.06.2009, and no new errors occur. So how to make LED not blinking if really no errors present ?

thanks
2 REPLIES
Lesley Persyn
Frequent Advisor
Curtis Ballard
Honored Contributor

Re: 1/8 G2 Tape Autoloader SCSI: how to get rid of error ?

With that revision of firmware the error LED will only clear following a power cycle.