1/8 G2 auoloader error: drive loggedaout code fb00

[elvin inoa peña]

hi

i have a 1/8 G2 autoloader unit that was working fine for a while but now when you power on the unit and it enter in the ready state, 2 min later it shows this rror message: drive loggedout error code: fb00. What could be the cause of this error?


PD: sorry for my english im latin and dont speak the english very well.

P.S. From Tape > Tape Backup (Small and Medium Business)to Tape Libraries and Drives. -HP forum moderator

[STrinidad]

Hi!

Who can help us to solve this problem?

I have the same error problem

best regards;

ST

[Torsten.]

Again (as in the other thread you posted to), replace the drive.

[STrinidad]

Its easy to said "Replace the drive"
Can somebody, think in a way to solve this problem?

In my case Cartridge is stuck into the drive

waiting for your accurate and logical answer

[Torsten.]

How do you want to repair a dead drive?

Tape drives may get mechanical problems (mot of the times) or problems with the electronics inside. In both cases there is nothing you can repair except a unit replacement.

Here is how you can remove the tape:

https://support.hpe.com/hpesc/public/docDisplay?docId=c03596030en_us&docLocale=en_US&page=GUID-104D29E7-CECF-4B00-B7A1-51F93D767A8E.html

[Moderator edit: Updated the broken link.]

[Alireza Babri]

Hi
Brother try pulling back your msl tape library to an older firmware.

Regards
Alireza Babri

[Alireza Babri]

Or you may update the firmware of your library
This somehow happens on firmware miss-matches

Regards
Alireza Babri