StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

1/9 Autoloader DLT1

Alvin Poon
Occasional Visitor

1/9 Autoloader DLT1

Hi All,

I just installed the 1/9 autoloader on the server running windows 2000 advanced server
w/sp3 and Arcserver 2000. When I use Arcserver
to view the device, it shown the device
is BFC@MARCDDT1. I think is should be BNCHMARKDLT1. How can I solove it?
3 REPLIES
Eugeny Brychkov
Honored Contributor

Re: 1/9 Autoloader DLT1

Alvin,
check it with HP LTT available from http://www.hp.com/cposupport/information_storage/support_doc/lpg50128.html . Generate support ticket and attach it no your next reply
Eugeny
Marino Meloni_1
Honored Contributor

Re: 1/9 Autoloader DLT1

HI
usually this kind of problems are related to bent pins broken cable or terminators.
could you check with new ones.
if all is similar, try to connect only the controller with the terminator or only the drive with terminator, You should see the difference and found if the unit (part of the unit) is defective

marino
Alvin Poon
Occasional Visitor

Re: 1/9 Autoloader DLT1

Hi Eugeny Brychkov & meloni

Thanks for your help. It really a problem caused by the cable.

Thank you very much!!!