cancel
Showing results for 
Search instead for 
Did you mean: 

1702 error

Ayman Altounji
Valued Contributor

1702 error

I get a 1702 error on post after I plug my 20/40 autoloader into my ML 370. This is a "cable error" or some description which I think indicates a SCSI termination error.

If I have an used SCSI id for the Autoloader and the supplied SCSI terminator attached to the Autoloader, why am I getting this termination error?

Thanks
1 REPLY
Ayman Altounji
Valued Contributor

Re: 1702 error

Please reference the ML370 SCSI Cabling Guide .....

Cable Guide