StoreEver Tape Storage
1748028 Members
4861 Online
108757 Solutions
New Discussion юеВ

Re: 3 new drives in ESL9322

 
SOLVED
Go to solution
Brent DeGennaro
Regular Advisor

3 new drives in ESL9322

We recently installed 3 new LTO Ultrium 1 drives in our SAN connected ESL9322 and while the library recognizes the drives none of our SAN connected HP-UX servers sees them via ioscan -fnC tape. I can use mc commands to move tapes from a storage slot to the drive as well. Any ideas on what we're doing wrong?

ESL9322 with E1200 NSR.
3 REPLIES 3
Leon Rosier
Respected Contributor
Solution

Re: 3 new drives in ESL9322

Did you configure the E1200 as well?
If not, do so.

Leon
Marino Meloni_1
Honored Contributor

Re: 3 new drives in ESL9322

in order to present the drives to the server, the router (e1200, 2400,etc...) have a map that associate drive to lun, the lun is seen by the server.
In your case, you have to add these three disk to the map, or recreate a new map including all the drives.
Brent DeGennaro
Regular Advisor

Re: 3 new drives in ESL9322

The mapping wasn't configured correctly in the NSR so the wrong data was being presented to the switches. After filling the map, rebooting, and running insf -e all is well.

Thanks