StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

6/60 firmware upgrade using RMC

Bryan D. Quinn
Respected Contributor

6/60 firmware upgrade using RMC

Has anybody sucessfully upgraded their 6/60 library using RMC (Remote Management Card)?

I have downloaded (or atleast I think I have) the firmware and I am trying to update it using the RMC. I browse to the location of the firmware file and then click 'Start Download'. The download status box pops up and says 'No Download in Progress'.

Any ideas on what the problem could be?

Any help would be greatly appreciated.

Thanks,
-Bryan
3 REPLIES
Shaikh Imran
Honored Contributor

Re: 6/60 firmware upgrade using RMC

Hi,
Not the solution but you can try.
I have'nt tried using the RMC But i advise you to look for the option in stm.
Have you tried this from the control panel of the library.
I have successfully upgraded the firmware of
DLT drives in the library from the STM,
but not the library firmware.

Regards
I'll sleep when i am dead.
kirit_2
Frequent Advisor

Re: 6/60 firmware upgrade using RMC

Hi

There are two ways to do it...
one from stm and another from L & TT tool
- for both version there are different files availble to download the firmware of library....let me know if you interested in knowing the procedure for this.
Bryan D. Quinn
Respected Contributor

Re: 6/60 firmware upgrade using RMC

Thanks for your responses, but I was specifically trying to do this via the RMC....basically because it says I can. I know I can do it from L&TT or STM, but I was just trying to get the RMC method working. I appreciate your responses. If I can not get the RMC method working I will go with one of the other options, which I am familiar with.

Thanks,

-Bryan