StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding a terminator causes DDS4 device to have a status of NO_HW

Adele Taylor
Occasional Contributor

Adding a terminator causes DDS4 device to have a status of NO_HW

When ever I add a terminator to my DDS4 drive, the device has a status of NO_HW.

On reboot my drive does not exist and I can not locate it via sam.

Any ideas - PLEASE.

OS - HP-UX 11.0
Model - N4000

 

P.S. This thread has been moved from Disk to Tape Libraries and Drives. -HP Forum Moderator

2 REPLIES
Adele Taylor
Occasional Contributor

Re: Adding a terminator causes DDS4 device to have a status of NO_HW

I've solved my error - Well HP Support did.
Alexander M. Ermes
Honored Contributor

Re: Adding a terminator causes DDS4 device to have a status of NO_HW

Hi there.
Could you pls let us know, what the solution is ?
It might help some other people in the same situation.
Thanks in advance.
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"