HPE Community
StoreEver Tape Storage
1753406 Members
7396 Online
108793 Solutions
New Discussion

Apadtec 29160 SCSI card will not see TL891 library

 
Ayman Altounji
Valued Contributor

‎08-26-2001 04:00 PM

‎08-26-2001 04:00 PM

Apadtec 29160 SCSI card will not see TL891 library

3 serverw ith same setup.

DL380 with Adaptec 29160 (LVD) scsi card with TL891 library off each one.

The card is installed in NT without any error messages.

The SCSI card in the post reports "host configuration error" and does not see the tape library.

The tape library is terminated correctly but on the SCSi (yellow) label on the back ohas "LVD / Diff". What differnce does this "diff" make? Is the an imcompatability bewtween the device and the card, even though both a re LVD?
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎08-29-2001 04:00 PM

‎08-29-2001 04:00 PM

Re: Apadtec 29160 SCSI card will not see TL891 library

Look like I got this resolved. The tl891 actually has "scsi / diff" on the back. The card is lvd but the tape library is a HVD device. Supposedly some tl89s come as LVD and some as HVD (i think the older ones).
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.