StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Autoloader 1/8 G2 Ultrium 232 and non-hp server

Mynor Aguilar
Valued Contributor

Autoloader 1/8 G2 Ultrium 232 and non-hp server

I'm trying to find a compatible card for a dell server with PCI ports, Right now it is connected to a Adaptec AHA 2940UW which detects the driver but not the robotics (the O.S. sees it as a single driver) I'm not sure if that card has multi LUN support. does anybody know of a compatible PCI card for this autoloader?

regards
4 REPLIES
Marino Meloni_1
Honored Contributor

Re: Autoloader 1/8 G2 Ultrium 232 and non-hp server

I think the 2940 support Lun scan, you should enable it entering in the bios setting of the HBA usualy CTRL-A at the time the banner is shown during post

Re: Autoloader 1/8 G2 Ultrium 232 and non-hp server

Try the Card 374654-001.

In some of the cards there was an option to Enable LUN scanning in BIOS.

U might wanna check this when the Server boots up.
I am an HP employee

Re: Autoloader 1/8 G2 Ultrium 232 and non-hp server

Sorry 374654-B21 is the Correct Part!
I am an HP employee
Veram_
Frequent Advisor

Re: Autoloader 1/8 G2 Ultrium 232 and non-hp server

Check out this matrix :

ftp://ftp.compaq.com/pub/products/storageworks/techdoc/ebs/EBSMatrix-0508.pdf


See Page 36 , table with the name "Third Party SCSI HBA and Integrated SCSI Controllers" should explain which works for the HP autoloader , check also by Dell whether the chosen HBA is working with the Server/PC , too