StoreEver Tape Storage

Re: Backup exec 10d with msl 2024

 
Nathan Stueland
New Member

Re: Backup exec 10d with msl 2024

I made a mistake earlier in my post. I have a G4 not a G3. Too many servers to keep track of... lol
Julia Reingold
New Member

Re: Backup exec 10d with msl 2024

Hi guys!

Do you know if LSI Logic 53c1010-66 adapter supports LUN scanning?

Thanks!
Mark Cannistraci
New Member

Re: Backup exec 10d with msl 2024

The simple way of looking at these problems is this: Do you have a Host Controller or an Array Controller? If you have an Array controller, then your library isn't going to work. All HP robotic library devices have to be connected to a Host Controller. RAID Array controllers don't support LUN scanning. Get a host controller and your life will be alot easier. Even if it's not the recommened speed (say an Adaptec 29160 instead of a Adaptec 29320) it'll still work, just not at the rated transfer speed. BTW: Both of these Host controllers support LUN scanning and are fairly cheap!

Hope that helps you all!
wingnut59
New Member

Re: Backup exec 10d with msl 2024

we have the HP Single Channel Ultra320 SCSI HBA G2, using backup exec 10.0 (5520) but still cannot get the library to be seen. Any ideas?