Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot unload exchanger medium

nijusiraj
Frequent Advisor

Cannot unload exchanger medium

Hi Team, we have Win2003 server as CM , Unix as client and EML 103e Tape Library.

 

We are taking Oracle Integration backup while running backup we are getting below error

 

[Minor] From: BMA@uigcdb11 "HP:Ultrium 4-SCSI_6" Time: 6/18/2013 12:29:32 AM [90:56] /dev/rtape/tape5_BESTn Cannot close device ([6] No such device or address)

 

[Major] From: BMA@uigcdb11 "HP:Ultrium 4-SCSI_6" Time: 6/18/2013 12:29:33 AM [90:64] By: UMA@dpcl101.uiic.in@scsi5:0:0:0 Cannot unload exchanger medium (Details unknown.)

 

Apart from this backup completed successfully. Please suggest to resolve this issue

 

Thanks, nijusiraj

5 REPLIES
Torsten.
Acclaimed Contributor

Re: Cannot unload exchanger medium

First you should check the library and the logs from commandview tl to see if the box has a problem.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
nijusiraj
Frequent Advisor

Re: Cannot unload exchanger medium

Hi Torsten,

 

Apart from this particular backup. All other backups are running fine using the tape library drives

 

Thanks,

nijusiraj

Eblyn Solis
Honored Contributor

Re: Cannot unload exchanger medium

hi,

 

Post output on server uigcdb11:

#devbra -dev

 

or check if you have some stuck tape on library, or check comunication between MA y DA.

 

Regards

 

 

Please assign a kudo to this post, if you find it useful.
Torsten.
Acclaimed Contributor

Re: Cannot unload exchanger medium

Did you receive the error again?

Looks like the tape was loaded on 6/17/2013 7:00:40 PM, data was written, data was written on Time: 6/18/2013 12:29:10 AM too, but then "disappeared" somehow.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
nijusiraj
Frequent Advisor

Re: Cannot unload exchanger medium

Hi Torsten,

 

Still we are facing the error. as DP support engi suggested to remove PHKL_41419( fs_spec cumulative patch.

 

I am checking is that anything apart from removing PHKL_41419( fs_spec cumulative patch 

 

Thanks,

nijusiraj.