Configure MSL5026 on SAN EVA

[CA1239446]

Hello,

Today, my MSL5026G2 is SCSI attached with proliant server. I'd like to plug this library on the san network. What is the first step (after physical plug of course) ?

Thanks

[meloni]

First you need to add a router ( NSR E1200 ) that will route your scsi devices in SAN.
Then configure the router, creating a Map and assign the map to the host that should see and manage the robot and the Tapes.

[CA1239446]

The router is the fiber card ?

[meloni]

The NSR is a module that allow to route the parallel scsi signal to the FC scsi signal

this module is to be put in the library to allow the MSL to be seen in the SAN, connecting the NSR to the switch

http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?〈=en&cc=us&prodTypeId=12169&prodSeriesId=316024&cc=us〈=en

(and obvioulsy you cannot connect the parallel scsi cable from the drives to the EVA itself)

[CA1239446]

ok i'v got it and it's always plug into library.