Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure SAN switch for tape library

kent ehrman
Occasional Contributor

Configure SAN switch for tape library

Is there a certain SAN switch configuration setting required when using a tape library.

I have a HP MSL2024 connected to a HP AA978A (Silkworm 3850). The WWID for the library never show up.

I replaced the AA978A with a Compaq 1gb fiber switch and I was able to reach the libary using VMS.

1 REPLY
Prokopets
Respected Contributor

Re: Configure SAN switch for tape library

I don't see your switch in compatibility matrix (http://h18000.www1.hp.com/products/storageworks/ebs/pdf/EBSMatrix-0610.pdf). It may be not supported for this library.