StoreEver Tape Storage
1748185 Members
3960 Online
108759 Solutions
New Discussion

Correct driver to use with StorageWorks MSL6000

 
wingnut144_1
Occasional Contributor

Correct driver to use with StorageWorks MSL6000

I work for a state agency, and someone from another ageny gave me a StorageWorks MSL6000 library to replace some of our older hardware.

 

I'm trying to find out what driver I should use.  I looked on:  http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?taskId=135&cc=us&lang=en&prodSeriesId=316040&prodTypeId=12169  and saw a ton of options

 

But I'm a little confused.  We're going to be using a SCSI connection from the server to the storage library, and using LTO3 tapes in the drive itself.

 

Based on that, what would be the correct driver I'd want to download and use on the Windows 2003 server?

 

Thanks!!

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: Correct driver to use with StorageWorks MSL6000

Most backup applications have their own drivers - so you should use them if available.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!