DAT 40x6e on OpenBSD

[Mike Maki]

I'm trying to get my DAT 40x6e to work with an OpenBSD 3.3 install. Anyone have this device working on any BSD on Linux?
-
dmesg reports the drive:
-
st0 at scsibus2 targ 5 lun 0: SCSI2 1/sequential
removable
st0: density code 0x26, variable blocks, write-enabled
ch0 at scsibus2 targ 5 lun 1: SCSI2 8/changer removable
-
The command mt status returns:
SCSI tape drive, residual=0
ds=3
er=0
blocksize: 0 (0, 0, 0, 0)
density: 38 (0, 0, 0, 0)
-
but mt erase or trying to dump to tape results in:
Sep 15 15:55:56 samo-hqfile /bsd: st0(siop1:6:0): Check Condition on opcode
0x10
Sep 15 15:55:56 samo-hqfile /bsd: st0(siop1:6:0): Check Condition on opcode
0x10
Sep 15 15:55:56 samo-hqfile /bsd: SENSE KEY: Media Error
Sep 15 15:55:56 samo-hqfile /bsd: SENSE KEY: Media Error
Sep 15 15:55:56 samo-hqfile /bsd: INFO FIELD: 1
Sep 15 15:55:56 samo-hqfile /bsd: INFO FIELD: 1
Sep 15 15:55:56 samo-hqfile /bsd: ASC/ASCQ: Write Error
Sep 15 15:55:56 samo-hqfile /bsd: ASC/ASCQ: Write Error
-
Thanks for any help,
-
Mike