StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

DLT 8000 and drive HP C7200-8000 issue

SOLVED
Go to solution
Matthew A Speirs
Occasional Visitor

DLT 8000 and drive HP C7200-8000 issue

We have just resently restored our L9000 system with our ignite tape. We are running HP-UX 11.11 OS. Everything worked just fine but we are getting this message when we run IOScan

0/7 ba Local PCI Bus Adapter (782)
0/7/0/0 ext_bus SCSI C87x Fast Wide Differential
0/7/0/0.0 target
0/7/0/0.0.0 tape QUANTUM DLT8000
0/7/0/0.6 target
0/7/0/0.6.0 unknown HP C7200-8000
0/7/0/0.7 target
0/7/0/0.7.0 ctl Initiator

what do we need to do to get the HP C7200-8000 back to a known device instead of unknown
1 REPLY
Torsten.
Acclaimed Contributor
Solution

Re: DLT 8000 and drive HP C7200-8000 issue

This is the robot inside the C7200 tape library - you need to include the "schgr" driver into the kernel.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!