Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

DLT1 Erase locks server

Peter Wieland
Occasional Visitor

DLT1 Erase locks server

Backup Exec 8.0, Netware 5.1. Full erase causes server to go to 53% utilisation and users are unable to access server. The Backup Exec console screens are also locked up. I am not fully conversant with tape systems, but I assume that erase is a hardware function of the tape drive, and should not affect server utilisation. Can anyone put me right?
2 REPLIES
Alexander M. Ermes
Honored Contributor

Re: DLT1 Erase locks server

Hi there.
Backup software takes away a lot of resources, especially with DLT drives. These resources will be used to keep the DLT drive in streaming mode ( to avoid something similar like buffer underrun while burning cd's ).
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"

Re: DLT1 Erase locks server

Assuming the backup app is doing a scsi erase command without the immediate bit on, a full erase of a tape can take a few hours. The problem is, the driver is most likely stuck waiting for the scsi card driver to complete the erase command. The scsi card driver is waiting or sleeping for the command to finish which takes a long time. Who knows what the drivers are doing from a resource standpoint waiting? Also, the OS may be poor about handling sleeping driver processes.