DLT7000 and SDLT

[Ayman Altounji]

Can anyone provide a solution of getting both an DLT7000 and SDLT working together on NT4. They both work on their own ok and no conflicts in SCSI ID.

[Ayman Altounji]

Try the SDLT on closest connector to the controller. Is the channel going LVD on the SDLT and the DLT7000 wants SE?
I think dlt7k came in lvd and se models. Adding an lvd scsi controller for the sdlt maybe an answer.
Did the SDLT come with NT drivers? Does NT backup work?

[Ayman Altounji]

the dlt7000 came with se and hvd, not lvd, the sdlt has lvd ,hvd and se,
probably you have 2 different intefaces, if one is lvd and one is se , the hba will adjust to the proper one, if you mix them, one will not work because he isn`t supported on the bus .