StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

DLT8000 Firmware Error

Matthew Newcomb
Occasional Contributor

DLT8000 Firmware Error

Went to upgrade my DLT8000 from V080 to V089 today and received a message firmware update failed and the LTT software hung. Rebooted server and now my tape drive has the all 4 lights on the right hand side lit up. Is it done for or is there anything I can do?
2 REPLIES
Satish M.S.
Valued Contributor

Re: DLT8000 Firmware Error

Newcomb:

While upgrading the firmware using L&TT, did you make sure that the RSM (Removable Storage Manager) was disabled?

When you say that the LTT software hung, did the operation time out or did the LTT just freeze

Alternatively, kindly call the HP tech support so that you can get a password to overide the firmware, i.e., downgrade to the original version.

Following this, try to run a read/write test from LTT and if possible, do post the results.

Thanks,

Satish
Matthew Newcomb
Occasional Contributor

Re: DLT8000 Firmware Error

Thanks for the response Satish, I got the drive replaced under our maintenance contract.

Matt