StoreEver Tape Storage

Re: Default Password for a MSL 2024

 
Paul M. Michelena
Occasional Contributor

Default Password for a MSL 2024

I received my tape library and the front LCD was damaged point is I am trying to logon with the web-interface (admin). I've searched and searched but can't find it.

Paul
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: Default Password for a MSL 2024

According to the manual, you must set the password from the front panel first:

"Before using the RMI (remote management interface), you must configure the device's networking and set the administrator password with the OCP"

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03594637

page 51

You can also try "00000000".

 

[Note: broken link updated/removed by Mod]


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ronny_7
Regular Advisor

Re: Default Password for a MSL 2024

Should be 00000000 by default.

Check out this thread,
https://community.hpe.com/t5/storeever-tape-storage/bd-p/itrc-198

 

[Note: broken link updated/removed by Mod]

Curtis Ballard
Honored Contributor

Re: Default Password for a MSL 2024

There is no default RMI password. Using all zeros as has been reported several times is not supposed to work and hasn't on the units I've tried.

With the latest firmware you should be able to call HP tech support and have them generate a temporary password then you can log into the web interface as admin and set a password. I haven't tried that feature yet though.
Maelito77
New Member

Re: Default Password for a MSL 2024

Very simple.
go to the tape and set the admin password from there, go back to you pc and use it.
Thanks
Ismael