E1200-320 Serial cable part number ( or pin out)

[Adrian McClatchie]

Hi,

We have an E1200-320 without the serial cable.

Does anyone know the correct part number so I can order one?

Thanks for the help.

[Víctor Cespón · Accepted solution]

It's an 3 pin port, details on page 99 of http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00637161/c00637161.pdf

The cable is:

417819-001 Very high density DB-9 connector to very high density 3-pin connector

[Adrian McClatchie]

Thanks.

[n10ct]

Would you be able to provide the pin outs for this cable,  I need one asap and cant get one! :)

I assume pin 1 is the pin on the left when looking at the card and the word serial written above the connector.

a stab in the dark would be the below config, as per most standards

Pin 1 = GND

Pin 2 = TX

Pin 3 RX ?

Cheers