Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

EML-E library firmware upgrade problem

Ron Knuist
Occasional Visitor

EML-E library firmware upgrade problem

After communicating with the EML-E library trough CVTL and upgrading the tapedrives I can't get a new connection via network.
CVTL sees the library but can't connect to it.
Only manageble via fibre. But I can,t connect trough fibre becouse there is a firmware mismatch on de controller-module.
Library gives a warning "initializing interface module".
Any sugestions how I can get connected again with the library?
2 REPLIES
Marino Meloni_1
Honored Contributor

Re: EML-E library firmware upgrade problem

probably some of the fw upgrade does not finish successfully.
you may try to pin reset the IM and see if it correct a temp situation
or you will have to idendify which of the fw are not matching the bundle connecting locally inside the private lan and logging in each of the components, once identifyed, you may be able to fix the fw mismatch and restart managing it remotely.
You may need to contact hp for step by step procedures
Ron Knuist
Occasional Visitor

Re: EML-E library firmware upgrade problem

Solved the problem:
It was an faulty LAN connection or cable between the Cascade and Public port.
After that I had to correct the fiber settings of the controller interface through a Telnet connection. Works fine now.
Thanks for the input.