HPE Community
StoreEver Tape Storage
1751722 Members
5723 Online
108781 Solutions
New Discussion

ESL problem

 
Eblyn Solis
Honored Contributor

‎06-05-2014 08:25 AM

‎06-05-2014 08:25 AM

ESL problem

Hi,

 

I have 2 else-712, the master display doesn’t work, show me estrange caracters  on it,  I replace the display for the slave and same behavior.
Also 12 drive on master don’t turn on and robot don’t move, even command view doesn’t respond.

Someone see this behavior? I think the controller cabinet die, the problem is I don’t have contract and can’t call for support.

 

Regards

Please assign a kudo to this post, if you find it useful.
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎06-05-2014 09:17 AM

‎06-05-2014 09:17 AM

Re: ESL problem

You can only narrow down this step by step - check each component if it works and if you see some indicators of an error - start with the IM - use a serial connection.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.