Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Ethernet Port on LTO-5 and LTO-6 Drives

SOLVED
Go to solution

Ethernet Port on LTO-5 and LTO-6 Drives

What is the Ethernet port on LTO-5 and LTO-6 drives used for? 

 

I've checked the User Guides for my MSL 2024 library and while it identifies the Ethenet port on the newer drives, it doesn't tell me what it used for or how to set the IP address for it. 

 

Thanks.

1 REPLY
Zsal
HPE Pro
Solution

Re: Ethernet Port on LTO-5 and LTO-6 Drives

The Ethernet port on LTO-5 and LTO-6 drives are for management only. They don't have any web console by themselves but they connect to an internal switch and the switch in turn is connected to IM (Interface Manager) available on Enterprise libraries like ESL/EML. Also it is important in reflecting the status of the secure manager.

 

Hence, from MSL 2024 standpoint it does not play any role.

 

Hope this helps!

Regards,

Zsal