Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Fault Code 20C0 soft on MSL5000

Mark Romiti_1
Occasional Contributor

Fault Code 20C0 soft on MSL5000

Getting a 'Fault Handler', 'Fault Code 20c0 (soft)' on a MSL5000 unit with two SDLT drives. The cleaning tape is stuck in the SDLT drive 0, drive 1 is fine. Drive 0 has been disabled in BackupExec for now.
2 REPLIES
Sameer_Nirmal
Honored Contributor

Re: Fault Code 20C0 soft on MSL5000

AwadheshPandey
Honored Contributor

Re: Fault Code 20C0 soft on MSL5000

â ¢ Press the Enter button to clear the
message.
â ¢ Ensure the drive shows good status
through the drive status window.
â ¢ Check SCSI ID settings.
â ¢ Cycle power to the library or reboot
using the GUI touch screen.

Awadhesh
It's kind of fun to do the impossible