Frequent Advisor



I have a SAN network with two LTO Libraries. I wish to upgrade the firmware on the Library but i can't remember the password. What is the factory default password for the Library or how can i erase the password from the Library to upgrade the firmware has soon as possible.

I also have another Sure Store autoloder DLT 800 which reads RMC not presently
Curtis Ballard
Honored Contributor

Re: Firmware

You need to provide a lot more information than that. There are a lot of different LTO libraries that you may have connected on your SAN.

It is likely that you don't even need a library password to update your firmware. HP Library and TapeTools from can download the firmware from any host on the SAN with access to the tape library.