StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 1/9 Ultrium C7145 installation

SOLVED
Go to solution
John Jacobs_1
Occasional Contributor

HP 1/9 Ultrium C7145 installation

I have added the above referenced drive to an HP system running hp-ux 11.0.
When doing an ioscan this device shows up as unclaimed but the drive inside shows as "stape".

What procedures do I need to do in order to make this changer claimed as "autoch"

output below:

0/1/3/0.0 target
0/1/3/0.0.0 unknown HP C7145
0/1/3/0.3 target
0/1/3/0.3.0 tape HP Ultrium 1-SCSI
2 REPLIES
Eugeny Brychkov
Honored Contributor
Solution

Re: HP 1/9 Ultrium C7145 installation

Hi John,
go to SAM, kernel configuration, and include driver 'schgr' into kernel. Rebuild kernel and reboot. After reboot autochanged will be claimed with this driver
Eugeny
John Jacobs_1
Occasional Contributor

Re: HP 1/9 Ultrium C7145 installation

Thanks, this is exactly what I needed.