cancel
Showing results for 
Search instead for 
Did you mean: 

HP MSL 6000

Carl Corbett
Occasional Visitor

HP MSL 6000

I need to adjust the timing of the shuttle. However, when I put in the maintenance password, it goes to "Library busy performing an operation initiated by an external source". How do I get passed this message? The card is terminated, but not connected to a controller. I should be able to test/maintain offline.
2 REPLIES
Rob Leadbeater
Honored Contributor

Re: HP MSL 6000

Hi,

If I remember correctly you can get that message whilst the library is initialising after a power on...

You should be able to get past it if you just wait a little longer.

Cheers,

Rob
Carl Corbett
Occasional Visitor

Re: HP MSL 6000

I have let the system sit for 24 hours while powered up. I still receive a message stating that the library is busy. Any suggestions.