StoreEver Tape Storage
1748169 Members
4201 Online
108758 Solutions
New Discussion юеВ

HP StorageWorks MSL6000 series

 
Abdullah Al Amshan
New Member

HP StorageWorks MSL6000 series

Hello All,

I would like to connect to the Library throw IP Address, but its asking ENTER PASSWORD.

Pls. some help what will be the Password !
5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: HP StorageWorks MSL6000 series

Try with "2".

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Abdullah Al Amshan
New Member

Re: HP StorageWorks MSL6000 series

what 2??only number 2 you mean!
Torsten.
Acclaimed Contributor

Re: HP StorageWorks MSL6000 series

From manual (RTFM):

NOTE: The default level 1 password is 1. The default level 2 password is 2. The level 1 password
only allows use of passive features, such as viewing library status.
Use the MSLUtil.exe diagnostic utility and the serial interface to change the default passwords as
described in ├в Changing the Remote Management Interface Passwords├в on page 88.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Abdullah Al Amshan
New Member

Re: HP StorageWorks MSL6000 series

Hi Dear,

Thank you very much for your need full help.

Abdullah Al Amshan
New Member

Re: HP StorageWorks MSL6000 series

Hi,

One more question, how can I change the library name ?
And its possible to change it from the same page after connect?

Pls. your help

Thanks