Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

How do you stop dltape-VRTS from loading at boot

Tim Summerfield
Occasional Contributor

How do you stop dltape-VRTS from loading at boot

Recently we updated drivers on a device to use the lates HP driver - Now during the boot we see the following error in the event log:

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 07/11/2003
Time: 10:45:14
User: N/A
Computer: XXXXXXXX
Description:
The following boot-start or system-start driver(s) failed to load:
dlttape-VRTS

This driver is not required now for the backups to work.

Please do anyone know how to stop this from loading.

Tim
5 REPLIES
Allan_24
Regular Advisor

Re: How do you stop dltape-VRTS from loading at boot

Hi,

-Make sure that the only loaded driver from control panel is your update driver.

-Remove unnecessary driver(s) from the said panel, then restart your system.

Hope this will help
"You should be working"
Marino Meloni_1
Honored Contributor

Re: How do you stop dltape-VRTS from loading at boot

hi
DLTape-VRTS is a driver loaded with backup exec (Veritas), not sure if there is an option in the BS to unload his drivers.
Probably what you will have to do is to uninstall backup exec, when reinstalling again you will have an oprion to load veritas drivers or to load vendors drivers.
Chris Wyld
Frequent Advisor

Re: How do you stop dltape-VRTS from loading at boot

You don't need to uninstall Backup Exec, just removing the device from Control Panel should work. Are you running NT 4.0 or W2K?
Shanmanz
Occasional Advisor

Re: How do you stop dltape-VRTS from loading at boot

Go to the folder where Veritas Backupexec in installed normally c:\program files\veritas\backupexec\nt and run tapeinst.exe. This will give u an option to install the tape drivers.
Shanmanz
Occasional Advisor

Re: How do you stop dltape-VRTS from loading at boot

Go to the folder where Veritas Backupexec in installed normally c:\program files\veritas\backupexec\nt and run tapeinst.exe. This will give u an option to uninstall the tape drivers.