StoreEver Tape Storage
1748205 Members
3612 Online
108759 Solutions
New Discussion юеВ

How to replace picker in MSL 5030

 
Apolinario
Occasional Contributor

How to replace picker in MSL 5030

How can I replace the picker in MSL 5030?
3 REPLIES 3
V├нctor Cesp├│n
Honored Contributor

Re: How to replace picker in MSL 5030

You mean the robotic arm? It moves along a track that is fixed to the library floor. The spare part contains this track and the head with the bar code reader and picker.
You should take a look at the maintenance and service guide.
Apolinario
Occasional Contributor

Re: How to replace picker in MSL 5030

You are correct but where can i get the service manual? i could not find them in docs.hp.com
Torsten.
Acclaimed Contributor

Re: How to replace picker in MSL 5030

It's possible and not a magic task.
On some newer models it might be not possible due to the hardware design - you need to exchange the whole box.
Anyway, I would suggest to contact the support and let them do the task.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!