StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

I/O error ON DLT8000 firmware

tony_250
Occasional Contributor

I/O error ON DLT8000 firmware

I have an error message upgrading the firmware on a DLT8000. The error reads I/O Exception (error:2131 - I/O: Unknown ASPI error condition) Any one got nay ideas
swisstony
2 REPLIES
Cameron Todd
Regular Advisor

Re: I/O error ON DLT8000 firmware

ASPI is a SCSI interface standard - perhaps recheck that all your SCSI cables are fully seated and firmly screwed in. (Including terminator where required by the particular bus type.)
tony_250
Occasional Contributor

Re: I/O error ON DLT8000 firmware

Thanks for the reply but the tape device seems to be working ok and the backups are working ok now. I just cant update the firmware unfortunatly it is on a remote site and I can t check the cables.
swisstony