StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

I have 2504i d2d storageworks

vuorimi
Occasional Contributor

I have 2504i d2d storageworks

when i update firmware/software for that system
it stop run defrag

my firmware is 101.748

how i run defrag manually
6 REPLIES
Dave Dewar
Trusted Contributor

Re: I have 2504i d2d storageworks

Vuorimi

Are you sure the defragment process has stopped? It runs for 1 hour every night automatically. How have you determined it has stopped?
vuorimi
Occasional Contributor

Re: I have 2504i d2d storageworks

because it is not in log
when i make support ticket and check
file name defragtubelog.log

it shows that when i update firmware/software defrag stop working
Dave Dewar
Trusted Contributor

Re: I have 2504i d2d storageworks

Vuorimi,

I am looking into this for you and will reply back next week
Dave Dewar
Trusted Contributor

Re: I have 2504i d2d storageworks

Vuorimi,

We have verified that this is a bug and it will be fixed in the next release of firmware due in October 2010. Many apologies for this.

Cheers,

Dave Dewar.
vuorimi
Occasional Contributor

Re: I have 2504i d2d storageworks

i have check that my software version is 101.983
when next version is released?

my d2d system speed is now 60gb/hour
and i hope that next firmware speeds that speed to 180gb/hour
Dave Dewar
Trusted Contributor

Re: I have 2504i d2d storageworks

Vuorimi

The new firmware should be released next week.

Given the level of your performance I would suggest you review the latest D2D best practices document at
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02511912/c02511912.pdf

as I doubt you performance issues will be addressed by defragment being re-enabled and would suggest the reasons for your performance will be due to other factors on how you are using your D2D.

Cheers,

Dave Dewar