Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
Showing results for 
Search instead for 
Did you mean: 

IBM LTO-4 driver config

Frequent Advisor

IBM LTO-4 driver config


I have below output of ioscan -kfnC tape, and i would like to set the driver to atdd for H/W path 4 and 5 like it was for 3

How do i do that to accomplish, please guide with commands.

Thanks in advance.

# /usr/sbin/ioscan -kfnC tape
Class I H/W Path Driver S/W State H/W Type Descript
tape 0 0/0/1/0.3.0 stape CLAIMED DEVICE HP
tape 4 0/4/0/ stape CLAIMED DEVICE IBM
tape 5 0/4/0/ stape CLAIMED DEVICE IBM
tape 1 0/10/0/ atdd CLAIMED DEVICE IBM
tape 3 1/8/0/ atdd CLAIMED DEVICE IBM
Unix Administration Most Dedicated and Challenging Career in the World