StoreEver Tape Storage
1748142 Members
3495 Online
108758 Solutions
New Discussion

Re: LIBctrl task error

 
erfersi
Occasional Collector

LIBctrl task error

Hi there,

I've just found these error on the MSL G3 Series, Currently Installed Library Firmware 7.10 / 3.20e

0001 19.09.29 04:08:56.09 Libctrl task Error - HE: sled blocked
Return status: 0x80 - command failed
Global error code: 0x8D - HE: sled blocked
Robotic movement error: 0x14 - error during sled move -> check shipping lock
Task originator: 0x00 - Libctrl task
Extender library specifier: 0x00 - master library

1 REPLY 1
Cali
Honored Contributor

Re: LIBctrl task error

Hi,

it seems, that something block the Gripper/Sled inside.

Remove the Magazine take a lamp and look if there is a mechanical block.

Most Time a Tape fall Inside.

Cali

ACP IT Solutions AGI'm not an HPE employee, so I can be wrong.