LSI HBA occurs "Device slot number is outside the enclosure range"

[larkes]

When I use LSI 9300-8e to connect with my storage which includes one disk, the operation system displays the event "Device slot number is outside the enclosure range". I know the root cause is that the device slot number of  this disk is very large. But I still have some problems:

1. How does LSI 9300-8e check the value of enclosure range ? 

2. Which SAS SMP Reply packet or SCSI Reply packet describes the enclosure range ?

Thanks for your help!

[SanjeevGoyal]

Hello,

Please share the HPE product detail (like.....Tape drive model & DL380 Gen9) for further investigation.

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.

Regards,