StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

LTFS, HBA driver problem, LTO-6

 
Egal123
Occasional Visitor

LTFS, HBA driver problem, LTO-6

Hi,

my current configuration is: 

DL360g9 running Windows Server 2019

Additional H241 controller, Firmware 7.00, Driver HpSAMD.sys 8.04.0

LTO-6 Drive (6250)

 

Running the tape with Iperius backup is working fine.

If I want to use LTFS, I go following error message:

the hba driver doesnot support the required transfer size (512kb)

Where could I set up the transfer size?

 

Thanks in advance.

 

2 REPLIES 2
akbarua
HPE Pro

Re: LTFS, HBA driver problem, LTO-6

Hi,

Looks like we cannot modify or change seetting on SAS HBA 241.... (Zero Memory Card)

The same was possible with SAS P212 by adding Memory Card.

I work for HPE

Accept or Kudo

Egal123
Occasional Visitor

Re: LTFS, HBA driver problem, LTO-6

Hi,

in the compatibility matrix (https://www.hpe.com/storage/StoreEverSupportMatrix), the P212 is marked as not recomended for tapes and the maximum block size is 64k. The H241 is the recommended controller. So I think, the controller should be able to support LTFS with 512kb block size.

 

Regards

Egal123