LTO-2 Error code

[BR832640]

Hi,
where can I find the description for a LTO error code?
I have found the error "15005" in Legato Networker 7.1 device error code
The initial problem was I/O error during a save
Thanks for your help

[Lewis Finch]

I/O errors are caused by lots of things. I would be more interested in your hardware configuration. The LTO has some pretty strong system requirements to perform at maximum ability. What all do you have hardware wise? Downlaod Library and Tape Tools diagnostic from here to do some testing

http://h18006.www1.hp.com/products/storageworks/ltt/index.html

[BR832640]

My configuration : ESL9322 Library, 3 LTO-2 Fiber thru a HP-SAN, Server=Proliant ML530.
I installed L&TT , and it reported "Device Analysis completed, and some problem were found"
"This could be a faulty tape or associated with an unsuccessful tape load"
The error code should be more interresting.
My initial question was about the error code documentation; is it available for end-users?

[meloni]

this error do not appear a LTO internal code, the code recorded by LTO are in the Hex format 0x0000 so just four Hex value
Where did you get your code?

[BR832640]

The error code comes from the Backup Software (Legato Networker v7.1) in the Device Information pannel.

For Device Tape0: Volume error=15005
For Device Tape1: Volume error=0
For Device Tape2: Volume error=268436556

(perhaps is it a decimal view?
15005=0x3A9D
268436556=0xE3640CF)