LTO-6 Ultrium 6650 - LTFS Configurator Service not started!

[Jarek1]

Hi,

I installed all drivers to HBA, Tape Drive and also HPE OpenStore 3.4.2 on windows 10, windows 2019 server and result is always the same - FUSE4WinSvc service is starting and stop, so I can't create mapping to the drive.

Windows does not see any problem, just nothing is using this service after startup so it is closed.

Please help, can't use the drive at all.

Regards

[Jarek1]

MEssage from LTFS Configurator is:

Service not started!
Current state: 1
EXit Code: 0
Check point: 0
Wait Hint: 0

Everything is fine with the drive due to drive diagnostics...

[akbarua]

Hi,

Regards to Windows 2019 Server, I am not sure if its supported.... Need to Check,

For Windows 10, (64bit)..
Did we tried following options !! let us know any differences..

Using the ltfslibutil utility ................................ 26
Using the ltfsattr utility.....................................28

Mapping a tape drive to a drive letter -------------------- Page 9

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05386590&docLocale=en_US

[Jarek1]

Well, I did a workaround...

I installed windows 2012r2, updated first two update packages from microsoft and then it worked. 

WARNING!

if U update everything then it stops working. FUSE4win won't start any more, so there is a problem with service compatibility with updates....

Regards