Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

LTO4 w SmartStart 4600

Ronand
Occasional Visitor

LTO4 w SmartStart 4600

Hello all,

i'm getting an event ID 11 every time i try to run a backup job using BackupExec 12. the job just dies. the equipment i'm using:

HP DL380 G5
Smart Start 4600 4 port
2 HP LTO4 hotswap modules

All this equipment is brand new, except the scsi cables. i tried diffrent ones.

Can anyone help me, i've tried too many things to write on the Thread.
1 REPLY
Torsten.
Acclaimed Contributor

Re: LTO4 w SmartStart 4600

Don't know what drive model do you have exactly and what is "Smart Start 4600 4 port"?

Anyway, check the compatibility here.

http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/13-0003-0001.html#matrixtable


For example this page is about

HP ProLiant DL365 G5
and
EH854A - HP StorageWorks Ultrium 1840 SCSI External Tape Drive

http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/Detail/16-0043-0177.html#CONTROLLERS


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!