HPE Community
StoreEver Tape Storage
1752777 Members
6193 Online
108789 Solutions
New Discussion

LTO4 w SmartStart 4600

 
Ronand
New Member

‎06-04-2008 07:24 PM

‎06-04-2008 07:24 PM

LTO4 w SmartStart 4600

Hello all,

i'm getting an event ID 11 every time i try to run a backup job using BackupExec 12. the job just dies. the equipment i'm using:

HP DL380 G5
Smart Start 4600 4 port
2 HP LTO4 hotswap modules

All this equipment is brand new, except the scsi cables. i tried diffrent ones.

Can anyone help me, i've tried too many things to write on the Thread.
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎06-05-2008 12:22 AM

‎06-05-2008 12:22 AM

Re: LTO4 w SmartStart 4600

Don't know what drive model do you have exactly and what is "Smart Start 4600 4 port"?

Anyway, check the compatibility here.

http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/13-0003-0001.html#matrixtable


For example this page is about

HP ProLiant DL365 G5
and
EH854A - HP StorageWorks Ultrium 1840 SCSI External Tape Drive

http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/Detail/16-0043-0177.html#CONTROLLERS


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.