StoreEver Tape Storage
1748128 Members
3624 Online
108758 Solutions
New Discussion юеВ

Re: ML350 cannot detect MSL6030

 
Huynh Minh
New Member

ML350 cannot detect MSL6030

I installed HBA card on ML350, and HBA driver. ML350 is working good and detected HBA card.
i connected fiber cable from MSL6030 to ML350 and install driver MSL6030 on ML350. But ML350 cannot detect tape library.
I Think the problem base on driver of MSL6030, how can i download right driver ?

I am using win2k3 x86 on ML350
6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: ML350 cannot detect MSL6030

Connect to the NSR and check the mapping. The new host is likely not allowed to access the library in current settings.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Huynh Minh
New Member

Re: ML350 cannot detect MSL6030

I am sorry, but what is the NSR
Thanks
Minh
Torsten.
Acclaimed Contributor

Re: ML350 cannot detect MSL6030

This is the card in the library where the fibre cable plugs in.

NSR = network storage router

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Huynh Minh
New Member

Re: ML350 cannot detect MSL6030

I am using e1200-320 4Gb Fibre Channel Interface Card on MSL6030 to connect ML350.

HBA card on ML350 is HP StorageWorks FC2142SR 4Gb PCIe HBA P/N: A8002A

what configurations on this card need to do to connect MSL6030 to ML350 ?
Torsten.
Acclaimed Contributor

Re: ML350 cannot detect MSL6030

Connect to the NSR and insert the hosts WWN into the mapping.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Huynh Minh
New Member

Re: ML350 cannot detect MSL6030

Thanks for your intruction, i found the problem base devices system, HBA card is not working on ML350, it is working on System x3550