Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 2024 Configuration

subashbl870
Regular Advisor

MSL 2024 Configuration

I will tell u our Server details . we have C7000 enclosure ,We have 3 servers and EVA4400 storage( BL870C 2Nos BL460C)Enclosure back side it's has MDS9124e Fiber channel switch , MDS9124e it's has 8ports of FC Port . now we had occupied 4 ports for EVA4400 Storage and replications for Site "A" and Site "B" . Another 4FC ports is free ( Empty ) ,we bought MSL2024 Tape library and FC DS-SFP-FC4g-SW adapter and also FC optic cable . can i install new FC DS-SFP-FC4g-SW to MDS9124e empty port? This is one end . Another one end to MSL2024 tape library. after that i am going to install HP Data protector6.1 to one of the BL460c Server . is it any disturbance for Data replication ? or can i configure any zoning ?
1 REPLY
damiri
Regular Advisor

Re: MSL 2024 Configuration

if your MSL2024 is FC based, you have enough ports on Cisco FC siwtches, you can do anything you want. Replication should be Ok, use zoning to separate traffic.