StoreEver Tape Storage
1748153 Members
3599 Online
108758 Solutions
New Discussion

Re: MSL 4048 stucked on firmware upgrade

 
SOLVED
Go to solution
mh12
Occasional Contributor

MSL 4048 stucked on firmware upgrade

I got MSL 4048 stucked on firmware upgrade. I was advised to do firmware upgrade in order to get rid of "HE: sled outside range" error.

 

Cannot reboot the library (Unit is busy).

Only hope is to turning it off. Am I right?

 

I used HP Library and Tape Tools 4.15 to upgrade library firmware to 8.70 version. It failed (timed out) but after reboot it shows 8.70 firmware.

Then I updated HP LTT to 4.17 and followed to upgrade drive firmware from H58W to H6FW which failed again but this time the library remains "stucked".

 

upgrade.png

 

ilo.jpg

 

drives.jpg

 

conf_trace.jpg

 

std_trace.jpg

1 REPLY 1
Torsten.
Acclaimed Contributor
Solution

Re: MSL 4048 stucked on firmware upgrade

I have seen this before and since this time I only use the web page or USB for upgrades.

 

Wait a while and power cycle the box, this is IMHO the only way.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!