Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 4048 two drives with two ports fibre channel each drive connect to two switches fibre channel

MSL 4048 two drives with two ports fibre channel each drive connect to two switches fibre channel

I have an MSL 4048 with two drives each drive with two ports fibre channel. And i have two switches fibre channel. I have one media server with two host bus adapter connected to the two switches with multiphating.

My question is, i have to connect to four ports fibre channel in two drives to two switches for redundancy ? how i have to conect ?
1 REPLY
Torsten.
Acclaimed Contributor

Re: MSL 4048 two drives with two ports fibre channel each drive connect to two switches fibre channel

The user manual only says:

"HP recommends that you cable Port A only..."

HP StorageWorks MSL2024, MSL4048, and MSL8096 Tape Libraries
User and service guide

Part number: AH218-96001
First edition: March 2007
page 40

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!